Description
A classic Glider ARTF from Graupner. This model was designed before brushless motors were available so a bit of modifications may be required to use them. Or you can use a480 class brushed motor as originally recommended.
Required to complete:
Transmitter and Receiver (4/5 Channels with V-Tail mixing)
4 Servos
Motor and ESC
Clear assembly instructions in German, English and
French. GRP fuselage, GRP canopy, pre-covered
wing and tailplane, decal sheet, control linkage
hardware.
Below is the original description from Graupner:
A small electric powered glider of handy size, specially designed for a direct-drive or geared SPEED 480 motor. The model features ailerons for excellent manoeuvrability. With a suitable transmitter mixer they can be set to deflect upward together to act as airbrakes for the landing approach. The kit is highly pre-fabricated, and include s GRP fuselage and factory-covered wing and tail panels, so that it can be assembled quickly and easily even by modellers with little experience of construction. A gear ed SPEED 480 motor gives the model an impressive climb, and the model is capable of simple aerobatics such as loop s, rolls, inverted flight etc., depending on the skill of the pilot.
Clear assembly instructions in German, English and
French. GRP fuselage, GRP canopy, pre-covered
wing and tailplane, decal sheet, control linkage
hardware.
Rudder
Elevator
Ailerons
Motor control
Wingspan approx. 1265 mm
Fuselage length approx. 890 mm
Overall length approx. 920 mm
Wing section SD 7943 mod.
Wing area approx. 22.5 dm²
Tailplane area approx. 3.5 dm²
Total flying surface area approx. 26.0 dm²
Weight according to fittings approx. 700 g
