Description
Key Features
- The RC-D100 V2 Charger boasts two independent charging circuits. This allows the user to have two completely separate charge set-ups operating at any one time. The charger includes two separate balancing boards for each channel as well as multiple charge leads – see the ‘What’s In The Box’ tab for more details.
- This charger is AC and DC compatible. When powered by AC mains, power is distributed between the two channels; 100watts split over the two charging channels. This can be distributed in whichever way the user likes (eg- 50/50, 60/40, 70/30, etc.). When used on DC power this charger has 100Watts on each channel.
- The RC-D100 V2 Charger is fully adaptable to be used as a power supply. It can supply 100W/13.8V DC power; this allows the user to power equipment from anywhere.
- The additional voice guide feature of this charger makes it more accessible than most other chargers on the market. This can be toggled on and off depending on personal preference, but it is great for creating a more user friendly option.
- The RC-D100 V2 can be controlled and monitored via your smartphone using the Charge Tracker V2 App. This allows the use to stop and start the charging process and check on progress. A PC software with the same abilities is also available. These can be accessed via the links in the ‘Downloads’ tab.
- The Charge Tracker V2 app features a ‘Scan to go’ function. This allows the user to save and run charge set-ups via a QR code. Once the parameters of the charge/discharge/storage charge are set the app can generate a QR code that stores this information to make operation easier than ever. Print and apply the QR code to your packs. then simply scan the code using the app to begin the process.
Specification
- Input Voltage AC 100-240V DC 11-18V
- Charge Circuit Power Ac Input 100W (Support Power Distribution) DC Input 2x100W
- Discharge Circuit Power 2x10W
- Charger Current Range 0.1-10A
- Discharge Circuit Range 0.1-2A
- Current Drain for Balancing Port Max 300mA/cell
- Trickle Charging Current 50mA-300mA & OFF
- LiPo/LiFe/LiIon/LiHV Battery Cell Count 1-6S
- NiMH/NiCd Battery Cell Count 1-15S
- Pb Battery Voltage 2-20V
- Dimensions 153 x 140 x 67mm
- Net Weight 668g
Additional Accessories
- Balance Board (x2)
- XT60 to 4mm Gold Charge Lead (x2)
- Bare-End to 4mm Gold Charge Lead (x2)
- UK Power Lead (AC)
- Instruction Manual
